Wednesday, 11 February 2015

Capture Methane Gas From A Septic System For Energy

Municipal sewage treatment plants can capture methane to generate electricity.


Harnessing the methane that is produced in septic systems holds great untapped potential. Called anaerobic digester gas (ADG) -- because it is produced by breaking down sewage sludge or other organic material in the absence of oxygen -- is a mixture of about half methane and 30 percent carbon dioxide that is usually flared, or burned, to mitigate environmental damage. However, by redirecting the captured methane-rich gas for use as a viable source of heat and fuel for the waste water management facility, sewage treatment plants can displace fossil fuel use and lower greenhouse gas emissions in a cost-effective manner.


Instructions


1. Take the sludge, or the organic matter that has settled out of waste water. Instead of discarding it, send it to an anaerobic digester to produce methane.


2. Store the sludge in a tank, followed by thickening it and then heating the sludge before it enters the digester.


3. Allow the anaerobic bacteria in the sludge digestion tank to work on the sludge, which releases methane.


4. Collect the methane in a gas holder and then pre-treat the gas before use to remove impurities.


5. Feed the treated methane gas into a prime mover that produces electricity.


6. Adapt the existing machinery to use the captured methane gas.


7. Redirect some of the electricity produced to power the earlier step of heating the sludge.


8. Use the rest of the power to run the other electrical needs of the waste water facility.

Tags: waste water, anaerobic digester, heating sludge, sewage treatment, sewage treatment plants